The aluminum and fiberglass overhead sectional roll up garage door model was developed to provide residential and commercial buildings with the benefits of superior-quality, strong, translucent, lightweight and maintenance-free fiberglass roll up doors.
Aluminum and Fiberglass Overhead Sectional Roll Up Garage Door
Application — Maximum size limits: Width 24’2″, Height 18’0″. Consult factory over 24’2″.
RAILS AND STILES —1 3/4″ thick, Stiles and Rails to be constructed of 4-sided .075 – .085 extruded 6063 – T6 aluminum alloy. Welded Construction.
FINISH— All aluminum extrusions to be anodized, Fluropon® custom color, or RAL powdercoat.
PANELS — White 5 oz. X .045 thick fiberglass reinforced polyester resin acrylic modified and UV stabilized.
GLAZING — Glazed with 1.8″ plexi is available up to 16 ft. wide.
BOTTOM WEATHER SEAL — Cold-weather rubber astragal.
SIDE WEATHER SEAL — Wood jamb – positive seal aluminum stops. Steel jambs – vinyl perimeter seal.
TRACK — ARM-R-TITE 2″ galvanized track.
HARDWARE — Galvanized steel hinges and aluminum roller carrier brackets for accurate section alignment. Full floating ball bearing rollers.
COUNTERBALANCE — Torsion (or extension) springs, galvanized lift cables, die cast aluminum drums.
LOCKING DEVICE — Automatic latching or side lock as required.
*Installations within 1 mile of salt water are not covered under finish warranties.
Aluminum and Fiberglass Rollup Door is manufactured by Arm-R-Lite. Thirty years ago, the Arm-R-Lon model was developed to be the superior choice commercial or residential fiberglass overhead sectional garage door.